Long multiplication and long division — where the decimal point goes, and why it goes there.
MultiplyCOUNT THE DECIMAL PLACES
DivideMAKE THE DIVISOR WHOLE
BothESTIMATE, CALCULATE, CHECK
Multiplication → count ·
Division → shift together ·
Final check → does the answer make sense?
A
Decimal Multiplication — count the places
The rule: ignore the points, multiply, count, then place.
Ignore the decimal points. Multiply. Count the decimal places in BOTH factors.
Put the decimal point in the product so the product has that total number of decimal places.
1
Multiply
Temporarily ignore the decimal points and multiply the digits.
2
Count
Add the decimal places in both factors.
3
Place
Put the point in the answer so it has that many decimal places.
Worked example 1 · 2.4 × 1.3Multiplication
factors2.4 × 1.3
1 · multiply24 × 13 = 312
2 · count2.4 1 place +
1.3 1 place =
2 places
3 · place312 → 3.12
Press Start, or Step through the solution one stage at a time.
step 0 / 5
Therefore answer
2.4 × 1.3 = 3.12
Two factors, one decimal place each, so the product needs two decimal places.
Count them from the right: 312 → 1 2 → 3.12.
Why 0.24 is wrong0.24 is wrong because it gives only two decimal places, but the two
factors have three between them. The third place must be held by a zero — that zero is a real digit
position, so it cannot be dropped. 0.06 × 0.4 = 0.024.
Essential multiplication check
Multiplying two positive numbers does not always make the answer bigger, and it does not always
make it smaller. Judge the result by the size of the factors:
• 2.4 × 1.3 — the product must be
greater than 2.4, because 1.3 is greater than 1. 3.12 > 2.4 ✓
• 0.06 × 0.4 — the product must be
smaller than 0.06, because 0.4 is less than 1. 0.024 < 0.06 ✓
B
Decimal Long Division — make the divisor whole
The rule: never divide by a decimal. Shift both numbers, then divide.
Make the divisor a whole number. Move the decimal point in BOTH the divisor
and the dividend the same number of places. Then divide.
1
Check
Look at the divisor. Is it a whole number?
2
Shift together
Move both points the same number of places until the divisor is whole.
3
Divide
Now use ordinary long division.
4
Check
Estimate, or multiply back, to confirm the quotient.
Worked example 3 · 7.2 ÷ 0.3Division
start7.2÷0.3divisor is not whole
↓↓ both points move one place right → each number is × 10
shifted72 ÷ 3divisor is now whole
divide72 ÷ 3 = 24
check24 × 0.3 = 7.2 ✓
Press Start, or Step through the solution one stage at a time.
step 0 / 5
⚠ Never move the divisor's decimal point without moving the dividend's decimal point
the same number of places.
Why shifting both is allowed
Moving both decimal points one place is the same as multiplying both numbers by 10.
The dividend becomes 10 times bigger and the divisor becomes 10 times bigger, so the
quotient stays exactly the same. 7.2 ÷ 0.3 and 72 ÷ 3 are the same division.
Therefore answer
7.2 ÷ 0.3 = 72 ÷ 3 = 24
Both numbers moved one place to the right. Changing 7.2 ÷ 0.3 into
7.2 ÷ 3 is a different question with a different answer.
Worked example 4 · the quotient's decimal point divisor already whole
4.8 ÷ 6 = 0.8
The decimal point in the quotient sits directly above the decimal point in the dividend.
Keep the leading zero
The quotient is 0.8. That leading zero must be written, because it holds the ones place.
Written without it the answer becomes .8, which is incomplete.
The same applies to 0.024 in Strategy A.
Worked example 5 · different numbers of decimal places one place, not two
5.67 ÷ 0.7
5.67÷0.7↓ 1 place↓ 1 place56.7÷7
56.7 ÷ 7 = 8.1answer
The trap
Do not move the dividend two places just because 5.67 has two decimal places.
You shift the dividend to match how far the divisor had to move — one place here.
So 5.67 becomes 56.7, which still has a decimal point, and the quotient is 8.1, not 81.
Essential division check
Estimate first, then verify with multiplication.
• For 5.67 ÷ 0.7: think
5.6 ÷ 0.7 = 8, so 8.1 is a reasonable answer. ✓
• Multiply back: 8.1 × 0.7 = 5.67. ✓
!
Stop! Check these three traps
These are the three ways marks are lost on this topic.
Trap 1 · counting places
Counting decimal places incorrectly
0.06 × 0.4 = 0.24
0.06 × 0.4 = 0.024
Reason: the product needs three decimal places, not two. Two of the places come from 0.06 and one from 0.4.
Trap 2 · one point only
Moving only one decimal point in division
7.2 ÷ 0.3 → 7.2 ÷ 3
7.2 ÷ 0.3 → 72 ÷ 3 = 24
Reason: both numbers must be multiplied by the same power of ten, otherwise the quotient changes.
Trap 3 · guessing
Placing the decimal point by guessing
put it wherever it looks right
follow the rule, then estimate
Reason: guessing is not a reliable method. It works until the numbers change, then it fails under exam pressure.